Clay by Kvadrat
Content: 76% linen 21% cotton 3% polyester
Width: Approx. 140 cm (Approx. 55")
Weight: 1,090 g/lin. m (35.16 oz/ly)
Warranty: 2 years
Yarn type: Stapel
Shrinkage: Approx. 3 / - %
Colour difference: Slight differences may occur
Meters per roll: Approx. 16 m (Approx. 17 yds)
Sustainability: Greenguard Gold, HPD, EPD
Country of Origin: Turkey
Professional dry cleaning with tetrachloroethylene, mild process
The Martindale method is the most widely used method for testing upholsteries for abrasion resistance. During testing the fabric is rubbed against a standard wool textile with a given weight-load applied. Running at intervals of 5.000 circular rubbing motions, the test continues until two threads are worn.
Private and low traffic public areas: 10.000 – 15.000 rubs
High traffic private and office spaces: 15.000 – 25.000 rubs
Public spaces and transportation: 25.000 – 45.000 rubs
FASTNESS TO RUBBING4 (Dry) 3-4 (Wet)
The term for determining the resistance of the textile’s colour to rubbing off and staining other materials. A distinction is made between wet and dry rubbing.
It is evaluated on a scale from 5 (best) to 1 (worst).
FIRE TESTSBS 5852 crib 5 with treatment • BS 5852 part 1 • EN 1021-1/2 • US Cal. 117-2013 with Cal. 117 compliant interliner • IMO FTP Code 2010 Part 8.
There are differing requirements concerning the flame-retardancy of textiles dependent on the area of application, country or even region. Our textiles pass the majority of international standards and are also tested for a selection of regional requirements.
PILLING4 (ISO 1-5),
Pilling is the term used to indicate whether small balls of fibres, known as pills, form on the surface of the fabric due to wear. It is evaluated on a scale from 5 (best) to 1 (worst).
LIGHTFASTNESS4-6 (ISO 1-8),
Lightfastness relates to the ability of a textile to retain its colour under light. When testing for lightfastness, samples are exposed to artificial daylight for a specified period.
The evaluation scale ranges from 1 (worst) to 8 (best). An increase of one point corresponds to a doubling of the lightfastness, i.e. the same fading takes twice as long.